Archive Post for September, 2022


The Applications of SFP Optical Transceivers

pending image

 by www.fiber-mart.com Today’s data centers are no longer just one or a few computer rooms, but a group of data center clusters. In order to realize the normal operation of various Internet services and application markets, data centers are required to operate in coordination. The real-time mass exchange of information [ Continue reading…]


What is Pre-terminated MPO MTP Cables?

pending image

 by www.fiber-mart.com The MPO fiber patch cord adopts MPO (Multi-fiberPushOn) connector. The precise connection of the patch cord is realized through two guide holes and guide pins with a diameter of 0.7mm on the left and right of the end face of the ferrule. At present, the most widely used is the [ Continue reading…]



How to Realize the Precise Connection of Optical Fiber by Optical Fiber Adapter?

pending image

 by www.fiber-mart.com When two optical fibers are connected, due to the difference in position, shape and structure of the two optical fibers, the energy cannot be 100% from one optical fiber to the other. That is, there will be connection loss. In order to minimize connection loss, the two fibers [ Continue reading…]


The Latest Methods of Aerial Fiber Cable Construction

pending image

 by www.fiber-mart.com Many people are confused about the hanging of aerial optical cables. In fact, there are two methods for aerial optical cables laying: one is “fixed-pulley traction method”, including “manual traction method” and “mechanical traction method”; the other is “cable tray moving and releasing method”. Next, we will take [ Continue reading…]


The Introduction of Popular Fiber Optical Cables

pending image

 by www.fiber-mart.com Central tube optical cable possesses loose tube structure of the central tube. Because its optical fiber is in the center of the cable, which has good bending characteristics and compact structure, it has become the main type after being introduced. Wuhan Institute of Post and Telecommunications Science, based [ Continue reading…]



The Key Technology and Application of CWDM

pending image

 by www.fiber-mart.com The emergence of CWDM (coarse wavelength divisio   n multiplexing) technology allows operators to find a low-cost, high-performance transmission solution. Because of its low cost, low power consumption, small size, and other advantages, CWDM has been widely used in metro transport networks. Many domestic and foreign manufacturers have [ Continue reading…]


What Is Fiber Optic Adapter

pending image

 by www.fiber-mart.com Fiber optic adapters (also known as fiber optic flanges, mating sleeves and couplers), are fiber optic active components. Optical fiber adapters are the most useful optical passive devices in optical fiber communication systems. The fiber optic adapter plays the role of aligning the sleeve. In addition, the fiber [ Continue reading…]


The Introduction of MPO/MTP Optic Fiber Patch Panel

pending image

 by www.fiber-mart.com With the rapid development of the network, the 40G network has now become so popular, and the 100G network is also widely used. Nowadays, the traditional fiber optical LC connection can no longer meet the high speed and high density requirements of the data center. In this case, [ Continue reading…]


How to Judge Whether the Fiber Optic Media Converter has Quality Problem?

pending image

 by www.fiber-mart.com Key words: Fiber optical media converter, industrial media converter, optical transceiver module, fiber optical cables, fiber optical jumpers   In general, the optical power of fiber media converter or optical modules is as following: multi-mode is between -10db ~ -18db; single-mode 20 kilometers is between -8db ~ -15db; and single-mode [ Continue reading…]